Tango TX2 Gas Detector
For the detection of NH3, CO, CO/H2 Low, HCN, H2S, SO2 and NO2.
Tango TX2 Gas Detector Overview
A reliable and accurate two-gas monitor with individual sensors.
The Tango TX2 is the only two-gas monitor with individual sensors in the market. This lightweight handheld gas detection meter increases site safety by allowing chemical manufacturing, oil, and gas organisations to detect two gases with a single monitor instead of leaving one hazardous gas unmonitored. The Tango TX2 can detect NH3, CO, CO/H2 Low, HCN, H2S, SO2 and NO2.
- It is Easy to Maintain - The Tango TX2 comes with a single, replaceable battery with a two-year lifespan eliminates the hassle of charging. It is also easy to keep the device updated with a DSXi Docking Station, which automatically bump tests, calibrates and uploads gas detector data each time you dock a monitor.
- Increased Compliance – It is regulated by company policy or legislation to monitor hazardous gas in the working environment to protect its employees. Often a company might choose to monitor the most dangerous gas present in the worksite and neglect other gases present when selecting a gas detection solution to reduce complexity and fleet management. This can put the employees at health risk. As the Tango TX2 monitors two types of gases it provides a reliable gas monitoring solution, reduces cross sensitivity, and has increased accuracy.
- Increase worker ownership – It saves time in managing a gas detector fleet by assigning each worker one monitor.
- Enjoy Peace of Mind with Lifetime Warranty
The Tango® TX2 helps organisations reduce project shutdowns from false alarms, increase worker trust in gas monitors, and minimises time spent on monitor charging and maintenance. Contact your local Air-Met office to find out how you can protect workers, reduce false alarms, and spend less time managing your gas detector fleets with the Tango® TX2.
For more information on the Tango TX2 Two Gas Detector, contact your local Air-Met office.
Tango TX2 Two Gas Detector Features
- A reliable two-gas monitor which uses two separate sensors to reduce cross sensitivity.
- Minimal change management when upgrading from a single gas monitor to a two-gas monitor.
- Lightweight and ergonomically designed to fit into the palm of your hand like a phone!
- Field-replaceable battery with a two-year run time eliminates the need for a charging infrastructure.
- Provides flexibility in how the device displays gas readings. You can select a primary sensor that is displayed all the time or choose to alternate between the first and second sensor every few minutes.
Tango TX2 Gas Detector Specifications
Refer to the specifications sheet for the most up to date specifications.
| Instrument Warranty | Guaranteed for Life™. Warranted for as long as the instrument is supported by Industrial Scientiifc Corporation (excluding sensors, batteries, and filters) | |
| CO and H2S sensors are warranted for 3 years from the initial purchase date. | ||
| All other sensors are warranted for 2 years from the initial purchase date. | ||
| Display | Segment liquid crystal display (LCD) | |
| Keypad | Two buttons | |
| Case Materials | Case top: Polycarbonate with a protective rubber overmold | |
| Case bottom: Conductive polycarbonate | ||
| Alarms | Three strobe-emitting visual alarm LEDs (two red; one blue); | |
| 100 decibel (dB) audible alarm at a distance of 10 cm (3.94"); Vibration alarm | ||
| Dimensions | 99 x 51 x 35 mm (3.9" x 2.0" x 1.4") | |
| Weight | 126.0 g (4.4 oz.) | |
| Temperature Range | -40°C to +50°C (-40°F to +122°F) † | |
| Humidity Range | 15%-95% Non-condensing (continuous) | |
| Sensors | NH3, CO, CO/H2 Low, HCN, H2S, NO2, SO2 – Electrochemical sensor technology | |
| Sensor Measuring Ranges | Ammonia (NH3): 0 to 500 ppm in 1 ppm increments | |
| Carbon Monoxide (CO): 1 to 1,000 ppm in 1 ppm increments | ||
| Carbon Monoxide (CO/H2 low): 0 to 1,000 ppm in 1 ppm increments | ||
| Hydrogen Cyanide (HCN): 0 to 30 ppm in 1 ppm increments | ||
| Hydrogen Sulphide (H2S): 0.0 to 200.0 ppm in 0.1 ppm increments | ||
| Nitrogen Dioxide (NO2): 0.0 to 150.0 ppm in 0.1 ppm increments | ||
| Sulfur Dioxide (SO2): 0.0 to 150.0 ppm in 0.1 ppm increments | ||
| Battery Pack | 3.6 V Primary lithium-thionyl chloride (Li-SOCl2), 1.5AH, 2/3AA, replaceable, non-rechargeable | |
| Datalogging | 3 months at 10-second intervals | |
| Certifications | INGRESS PROTECTION: | |
| IP66; IP67 | ||
| -40°C TO +50°C (-40°F TO +122°F) | ||
| ATEX1 | Ex ia I Ma | |
| Ex ia IIC T4 Ga | ||
| Equipment Group and Category: I M1 and II 1G | ||
| EN 60079-0 | 2012 | |
| EN60079-11 | 2012 | |
| EN 50303 | 2000 | |
| IECEx | Ex ia I Ma, Ex ia IIC T4 Ga | |
| IEC 60079-0 | 2011 | |
| IEC 60079-11 | 2011 | |
| UL (C-US) | Class I, Groups A, B, C and D; Class II, Groups E, Fand G; T4; Exia Class I, Zone0, AEx ia IIC T4 | |
| KC | Ex ia IIC T4 | |
| CMA | Ex ia I Ma; H2S, CO | |
Tango TX2 Two Gas Detector Usage and Application
- Fire and hazmat
- Iron and steel production
- Oil and gas
- Mining
- Agriculture
- Chemical plants
- Manufacturing
