Tango TX1 Single Gas Monitor
For the detection of CO, CO/H2, HCN, H2S, NH3, NO2 and SO2.
Tango TX1 Single Gas Monitor Overview
The Tango TX1 Single Gas Monitor simplifies gas detection while removing the hassles of maintenance and risks of sensor failure. Lightweight, portable and compact, the TX1 is 10 cm tall and 126g in weight, making it easy to wear comfortably while working without obstructing activity. With a two-year runtime and replaceable battery, the monitor eliminates the need for charging infrastructure and is backed with a Guaranteed for Life warranty.
Additionally, patented DualSense Technology allows two of the same sensor to be used with the unit while only displaying one reading, improving accuracy and ensuring that the monitor continues to operate smoothly even if one sensor fails.
For more information on the Tango TX1 Single Gas Monitor, contact your local Air-Met office.
Tango TX1 Single Gas Monitor Features
- Significantly increases worker safety – DualSense Technology ensures that regardless of your current bump test policy, you will be significantly safer with the Tango than with any other single gas instrument on the market today.*
- Longer battery life – Operates continuously in an “always-on” mode for three years. After the battery can no longer support instrument life, it can be replaced for another three years of continuous operation.
- Louder instrument alarm – Alarms at 100dB at 10 centimetres making it twice the volume of Industrial Scientific’s GasBadge units and louder than any single gas instrument on the market. Alarm volume can be increased by about 10dB for higher-noise environments with the addition of the optional AlarmAmp™.
Tango TX1 Single Gas Monitor Specifications
Refer to the specifications sheet for the most up to date specifications.
Instrument Warranty | Guaranteed for Life™. Warranted for as long as the instrument is supported by Industrial Scientific Corporation (excludes sensors, batteries, and filters). | |
CO and H2S sensors are warranted for 3 years from the initial purchase date. | ||
All other sensors are warranted for 2 years from the initial purchase date. | ||
Display | Segment liquid crystal display (LCD) | |
Keypad | Two buttons | |
Case Materials | Case top: Polycarbonate with a protective rubber overmold | |
Case bottom: Conductive polycarbonate | ||
Alarms | Three strobe-emitting visual alarm LEDs (two red; one blue); | |
100 decibel (dB) audible alarm at a distance of 10 cm (3.94"); Vibration alarm | ||
Dimensions | 99 x 51 x 35 mm (3.9" x 2.0" x 1.4") | |
Weight | 126.0 g (4.4 oz.) | |
Temperature Range | -40°C to +50°C (-40°F to +122°F) † | |
Humidity Range | 15%-95% Non-condensing (continuous) | |
Sensors | CO, CO/H2, HCN, H2S, NH3, NO2, SO2 - Electrochemical sensor technology | |
Sensor Measuring Ranges | Ammonia (NH3): 0 to 500 ppm in 1 ppm increments | |
Carbon Monoxide (CO): 1 to 1,000 ppm in 1 ppm increments | ||
Carbon Monoxide (CO/H2 low): 0 to 1,000 ppm in 1 ppm increments | ||
Hydrogen Cyanide (HCN): 0 to 30 ppm in 1 ppm increments | ||
Hydrogen Sulphide (H2S): 0.0 to 200.0 ppm in 0.1 ppm increments | ||
Nitrogen Dioxide (NO2): 0.0 to 150.0 ppm in 0.1 ppm increments | ||
Sulfur Dioxide (SO2): 0.0 to 150.0 ppm in 0.1 ppm increments | ||
Battery Pack | 3.6 V Primary lithium-thionyl chloride (Li-SOCl2), 1.5AH, 2/3AA, replaceable, non-rechargeable | |
Datalogging | 3 months at 10 second intervals | |
Certifications | INGRESS PROTECTION: | |
IP66; IP67 | ||
-40°C TO +50°C (-40°F TO +122°F) | ||
ATEX | Ex ia I Ma | |
Ex ia IIC T4 Ga | ||
Equipment Group and Category: I M1 and II 1G | ||
IECEx | Ex ia I Ma | |
Ex ia IIC T4 Ga | ||
UL (C-US) | Class I, Groups A, B, C, and D; Class II, Groups E, F, and G; T4; Exia | |
Class I, Zone 0, AEx ia IIC T4 | ||
-20°C TO +50°C (-4°F TO +122°F) | ||
CSA | Ex ia IIC; Class I, Groups A B C D; T4 | |
China EX | Ex ia IIC T4 Ga | |
INMETRO | Ex ia IIC T4; Zone 0 | |
PENDING: | ||
MSHA | Permissible Gas Monitor | |
KOSHA | Ex ia IIC T4 Ga | |
China MA | Safety Certificate of Approval for Mining Products |
Tango TX1 Single Gas Monitor Applications
- Shutdown
- Oil and gas
- Construction
- Utility
- Emergency response
- Power plant