Service Station Fuel Vapour and Leak Detection Kit
For monitoring VOCs, flammable gases and fuel leaks in service stations.
Air-Met Scientific’s Service Station Fuel Vapour and Leak Detection Kit is a comprehensive kit designed for service stations where flammable gases, volatile organic compounds (VOCs) and fuel leaks are a concern.
The Service Station Fuel Vapour and Leak Kit includes:
- PhoCheck Tiger VOC Detector
- Ventis MX4 Diffusion Unit
- Intrinsically Safe Solinst Interface Probe
- 2x Fire Extinguishers
- Spill Kit
The kit covers several areas associated with service station safety, with essential safety equipment for monitoring and responding to incidents.
The Tiger PhoCheck handheld photoionisation detector (PID) is utilised to accurately and rapidly hazardous VOCs in the surrounding area. Its remarkable two-second response time, user-friendly design, and exceptional resistance to humidity and contamination make it an excellent choice for VOC detection.
The Ventis MX4 gas detector is important for identifying spikes in the lower explosive limit (LEL) from flammable gases at the site. Suitable for personal monitoring and confined space entry, the Industrial Scientific Ventis MX4 Multi Gas Detector has configurable alarms that ensure workers are properly alerted in hazardous situations. Given the combustible substances on site, a fire extinguisher is also supplied for critical response to blazes before they escalate in an emergency.
An intrinsically safe interface probe is also supplied with the fuel station leak detection kit for the detection and measuring of fuel tank leaks that have seeped through the substrate into the water below. Any fuel or oil spills identified can then be handled with the included spill kit.
The Service Station Fuel Vapour and Leak Detection Kit is available for rental from Air-Met Scientific. For more information, contact your local Air-Met Scientific office.
Service Station Fuel Vapour and Leak Detection Kit Features
The kit includes:
- PhoCheck Tiger Handheld PID
- Ventis MX4 Multi Gas Detector
- Intrinsically Safe Solinst Interface Meter
- Two Fire Extinguishers
- Oil and Fuel Spill Kit
PhoCheck Tiger VOC Gas Detector Features
- Resistance to humidity and contamination
- High performance PID
- Rapid response and clear down time
- Internal gas table with over 480 VOCs and toxic compounds
- Large keypad and slim design for single handed operation
- Intrinsically safe
Ventis MX4 Portable Multi Gas Monitor Features
- 1 to 4 gas sensor configurations
- Rugged design for durability in harsh environments
- Certified IP66/67
- Quick access to peak readings on-screen after alarms
- Datalogging
- Clear audible and visible alarms
Solinst Interface Meter Features
- Narrow 16mm probe
- Approved for use in explosive environments
- Durable and easy to decontaminate
- Accurately laser marked each millimetre
Service Station Fuel Vapour and Leak Detection Kit Specifications
PhoCheck Tiger VOC Detector Specifications
| Minimum Resolution* | 1 ppb or 0.001 mg/m3 |
| Maximum Reading** | 20,000 ppm or 20,000 mg/m3 |
| Accuracy* | ± 5% display reading ± one digit |
| Linearity* | ± 5% to 100 ppm |
| Intrinsically Safe Approvals | ATEX II 2G Ex ia IIC T4 (- 15 0C ≤Ta ≤+60 0C), IECEx and CUL |
| Battery Life | Li-ion: life up to 24 hours, charge time 6.5 hours |
| Alkaline: 3 x AA, up to 8.5 hours life | |
| Lamps | 10.6 eV Krypton PID lamp (standard) and 11.7eV lamps available |
| Data Logging* | > 120,000 data log points including date and time stamp (33 hours at 1 log per second) |
| Communication | USB 1.1 |
| Calibration | Via calibration kit accessory |
| Alarm | Flashing LED and 95 dBA at 300mm (12”) audible sounder |
| Selectable vibrating alarm | |
| Pre-programmed TWA and STEL* | |
| Pre-programmed with 450 gases* | |
| Flow Rate | 220 ml/min with flow fail alarm |
| Temperature | Operating: -20 to 60 °C, -4 to 140 °F (non Intrinsically Safe) |
| Humidity: 0-99% RH (non condensing) | |
| Protection | Designed to IP65 (heavy rain) |
| C E 1180 | |
| EMC tested to EN61326-1:2006, EN50270:2006 & CFR 47:2008 Class A | |
| Weight & Dimensions | Instrument without probe: |
| Width: 340 x Height: 90 x Depth: 60 mm (13.4 x 3.6 x 2.4”) | |
| Standard case: 420 x 320 x 97 mm (16.5 x 12.5 x 3.8”) | |
| Instrument weight 0.72 kg (25 oz) |
*Model and gas dependent.
**Maximum reading is achieved with certain analytes such as ethanol.
Ventis MX4 Multi Gas Monitor Specifications
| Instrument Warranty | Two- year warranty, including sensors and battery | |
| Case Materials | Polycarbonate w/ protective rubber overmold | |
| Dimensions | 103 mm x 58 mm x 30 mm (4.1” x 2.3” x 1.2”) - Ventis lithium-ion battery version | |
| 172 mm x 67 mm x 66 mm (6.8” x 2.6” x 2.6”) - Ventis with pump lithium-ion battery version | ||
| Weight | 182 g (6.4 oz) - Ventis, lithium-ion battery version | |
| 380 g (13.4 oz) - Ventis with Pump, lithium-ion battery version | ||
| Operating Temperature Range | -20°C- 50°C (-4°F-122°F) | |
| Operating Humidity Range | 15%-95% Non-condensing (continuous) | |
| Display | Backlit Liquid Crystal Display (LCD) | |
| Power Source/Run Time | Rechargeable lithium-ion battery pack (12 hours typical @ 20ºC) - Ventis |
|
| Rechargeable extended-range lithium-ion battery pack (20 hours typical @ 20ºC) - Ventis (12 hours typical @ 20ºC) - Ventis with pump |
||
| Replaceable AAA alkaline battery pack (8 hours typical @ 20ºC) - Ventis (4 hours typical @ 20ºC) - Ventis with pump |
||
| Alarms | Ultra-bright LEDs, loud audible alarm (95 dB at 30 cm), and vibrating alarm | |
| Sensors | Combustible gases/methane - Catalytic Diffusion | |
| O2, CO, H2S, NO2, SO2 – Electrochemical | ||
| Sensor Measuring Ranges | Combustible Gases: 0-100% LEL in 1% increments | |
| Methane (CH4): 0-5% of vol. in 0.01% increments | ||
| Oxygen (O2): 0-30% of vol. in 0.1% increments | ||
| Carbon monoxide (CO): 0-1,000 ppm in 1 ppm increments | ||
| Hydrogen sulfide (H2S): 0-500 ppm in 0.1 ppm increments | ||
| Nitrogen dioxide (NO2): 0-150 ppm in 0.1 ppm increments | ||
| Sulfur dioxide (SO2): 0-150 ppm in 0.1 ppm increments | ||
| Certifications | UL: | Class I, Division 1, Groups A B C D, T4; Zone 0, AEx ia IIC T4 |
| Class II, Groups F G (Carbonaceous & Grain dust); | ||
| IP66; IP67 | ||
| ATEX: | Ex ia IIC T4 Ga and Ex ia I Ma; | |
| Equipment Group and Category II 1G and I M1; IP66; IP67 | ||
| IECEx: | Ex ia IIC T4 Ga; IP66; IP67 | |
| ANZEx: | Ex ia s Zone 0 I/IIC T4; IP66; IP67 | |
| CSA: | Class I, Division 1, Groups A B C D, T4; Ex d ia IIC T4 | |
| C22.2 No. 152 for %LEL reading only | ||
| INMETRO: | Ex d ia IIC T4 Gb; IP66; IP67 | |
| KOSHA: | Ex d ia IIC T4 | |
| MSHA: | 30 CFR Part 22; Permissible for underground mines; Li-ion versions only | |
| PA-DEP: | Permissible for PA Bituminous Underground Mines | |
| China Ex: | Ex ia d IIC T4 Gb | |
| China CMC: | Metrology approval | |
| China MA: | Approved for underground mines; diffusion (without pump) standard Alkaline version only |
|
| GOST- K: | PBExdiaI X / 1ExdiaIICT4 X | |
| GOST-R: | PBExdiaI X / 1ExdiaIICT4 X | |
Service Station Fuel Vapour and Leak Detection Kit Applications
- Service stations
- Fuel and oil leaks
- Gas and fuel vapour detection
- Flammable gas monitoring
- VOC detection
