Series 500 Air Quality and Gas Monitor

Overview

The Series 500 Air Quality Monitor enables accurate real-time surveying of common indoor air pollutants, all in an ultra-portable handheld indoor air quality monitor. Data is stored on board the Series 500 with a maximum 8,188 records available. To download the data a USB cable is supplied for connection to PC. Free PC software provided with the Series 500 takes the data and presents it in a chart or table view. Data can be downloaded and viewed in Excel.

The monitor can also operate in control mode. Upper and lower control limits can be easily set directly on the display. Using the 0-5V output the Series 500 can be used to switch on or off an externally connected device, such as an ozone generator, or system in the presence of a predetermined level of gas. By selecting the optional wall-mount bracket and plugging in mains power the Series 500 is effectively able to act as a fixed monitor as well as a handheld portable device.

Other features on the Series 500 include monitor ID and location ID. Monitor ID identifies the monitor uniquely and ensures that all data from it are tied to that monitor. Location ID can be used to tag measurements to a specific location which is helpful when sampling at a number of sites over the course of a day or week.

For more information on the Series 500 Handheld Air Quality Monitor, contact your local Air-Met office.

Features

Series 500 Handheld Air Quality and Gas Monitor Features Include:

Built-in data-logging
Lithium battery as standard
PC software (Windows 7, 8, XP compatible)
Interchangeable air quality sensor heads (30+ choices)
Connect direct to PC via USB cable
High and low alarms, control output
Link data to a specific location and monitor
Temperature and RH sensor (optional)
Tamperproof and water resistant FRP enclosure (optional)

Specifications

Series 500 Handheld Air Quality and Gas Monitor Specifications:

Measurement Units	Gas: ppm or mg/m3 \| Humidity: % \| Temperature °C or F
Reading Functions	Instant, minimum, maximum, average
Alarm Features	Low alarm, high alarm, mute (configurable)
Display Status Indicators	Alarm, battery, data logging, sensor, standby, monitor and location ID
Audible Alarm	Low and/or high alarm set points (with mute)
External Signal Functions	Low alarm, high Alarm, control (150mA max)
Sensor Calibration Features	Zero calibration, gain adjustment
Analog Output	0-5V
Digital Interface	RS232 to USB
Data Logging Capacity	Up to 8,188 records (2,706 incl. temp/RH)
PC Data Logging	Software and data cable supplied
Clock Function	Real time
Power Supply	12V DC (power adaptor/charger supplied 100-250V AC)
Rechargeable Battery	Lithium polymer 12V DC \| 2700mA/h (2 hr charge time / 8 hr run time)
Enclosure Material and Rating	PC and ABS; IP20 and NEMA 1 equivalent
Size (with sensor head)	195 x 122 x 54 (mm); 7? x 4¾ x 2? (in)
Weight (with sensor head and battery)	< 460 g; < 16 oz
Environmental Operating Conditions	Temperature: -5 oC to 45 oC ; Humidity: 0 to 95% non-condensating
Optional Accessories	Remote sensor kit, spare battery, car adaptor, wall bracket, carry case
Temperature & Humidity Sensor	Range -40°C to 124°C (-40°F to 255°F); Range 0 to 100% RH
Approvals	Part 15 of FCC Rules; EN 50082-1: 1997; EN 50081-1: 1992