Proactive Super Twister Plastic Pump
12-volt engineered plastic submersible pump for low flow sampling and purging of groundwater wells.

With the ability to operate under harsh conditions and higher turbidity, the Proactive Super Twister 12 volt engineered plastic submersible pump can run continuously in water and is capable of pumping up to 25m (85 feet) from ground level when connected to a 12-volt deep cycle battery.
The Proactive Super Twister Plastic Pump is ideal for continuous sampling and purging groundwater wells. Capable of low flow sampling down to 40 mL/s per minute, the pump is easy to use, offers greater sampling accuracy and has a compact and lightweight design, making it easy to transport and store. The Super Twister is resistant to wear and tear, making it ideal for frequent and long-term use and is capable of lifting up to 85 feet (26 meters) depth to water. .
For more information on the Proactive Super Twister Plastic Pump, contact your local Air-Met Scientific office.
Proactive Super Twister Plastic Pump Features
- Pumps up to 25m underground
- Capable of low flow sampling up to 40mLs per minute
- Can be used in conjunction with the Low Flow Sampling Controller and low flow sampling control valve to reach flow rates of 10mLs per minute
- Can endure harsh conditions with higher turbidity
- Can run continuously in water without cooldown
Proactive Super Twister Plastic Pump Specifications
Watt Consumption (Max) | 195 Watts (max) |
DC Volt Recommendation | 12-15 DC (direct current) at source |
AMP Consumption (Max) | 13 AMPS |
Measurements | Length 22" / Diameter 1.82" |
Required Tubing | 3/8" or 1/2" ID Tubing |
Supplied With | 90 Feet of Heavy Duty 10 Gauge Wire, Quick Diconnect Plug & Battery Claps |
Pump Construction | ABS |
Impeller Construction | Poly Acetal (POM) |
Motor Shaft Construction | Stainless Steel |
Wire Construction | PVC |
Seal Construction | Nitrile |
Proactive Super Twister Plastic Pump Applications
- Purging of groundwater wells
- Low flow sampling
- Continuous sampling