Related Products
NIM-513 Industrial Radiation Field Meter
The NIM-513 Is An Industrial Field Radiation Meter with Dual Sensor Probes For Measuring Electric And Magnetic Fields In Industrial Environments.
SKU
NIM513
NIM-513 Industrial Radiation Field Meter Overview
Designed to make measurements a simple process, the Narda Model NIM-513 combines an unprecedented ease of operation with powerful measurement capabilities.
It provides the industrial plant manager and safety professional with an accurate and inexpensive solution for proving compliance with regulations that cover exposure to RF radiation. The NIM-513 model provides a complete measurement system comprised of an extremely easy to operate meter and a probe that contains sensors to measure both the electric (E) and magnetic (H) field components of an electromagnetic wave.
There is no need to change probes to measure the electric and magnetic fields as the probe contains two sets of sensors that seperately measure each field. Simply press the E/H Field key combination to change the field that you want to measure.
The Narda Safety Test Solutions NIM-513 Industrial Radiation Field Meter is available at all Air-Met offices for sale only.
For more information on the NIM-513 Industrial Radiation Field Meter, contact your local Air-Met office.
NIM-513 Industrial Radiation Field Meter Features
The Narda NIM-513 Industrial Field Meter Features:
- Complete Measurement System with Dual Electric and Magnetic Field Probe for Frequencies up to 100 MHz
There is no need to change the probes as the probe contains two sensors that seperately measure each field. - Covers Most Industrial Equipment
Measures both the electric and the magnetic field components (E and H fields) for equipment operating below 300 MHz. -
No confusing scales. Simply read the digital display including the unit of measurement
-
No difficulty zeroing with the Auto Zero executed repetitvely every 15 minutes
- Fast and Reliable Measurements
- Extremely Easy to Use
- Low Cost, Compact and Lightweight
NIM-513 Industrial Radiation Field Meter Specifications
| NIM-511 Industrial Field Meter Specifications | |
|---|---|
| Display and Functions | |
| Display Type | Transflective LCD, monochrome, LED backlight |
| Display Size | 4 cm (1.5”), 128 x 64 dots |
| Refresh Rate | 400 ms |
| Result Display | E-field or H-field value (selectable, 4 digits) |
| Result Units |
mW/cm, W/m2, V/m, A/m
|
| Result Types (isotropic, RSS) |
ACT - displays the actual value
MAX - holds the maximum of the measured values
AVG - displays the 6 min time averaged result
SPATIAL - displays a spatially averaged result
|
| Hold | Hold button to freeze the value that is currently displayed |
| Zeroing | Automatic zeroing after power-on and repetitively every 15 min |
| Measuring | |
| Field Type | Electric (E-) field and magnetic (H-) field |
| Frequency Range |
10 MHz to 42 MHz
|
| Measurement Range |
E-field: 0.1 to 100 mW/cm2 (20 to 614 V/m)
H-field: 0.2 to 200 mW/cm2 (0.073 to 2.3 A/m)
|
| CW Damage Level | 50 W/cm2 |
| Sensor Type |
Two diode based systems for E-field and H-field
|
| Directivity | Isotropic (Tri-axial) |
| Readout Mode / Spatial Assessment | Combined 3-axes (RSS) |
| Uncertainty | |
| Flatness of frequency response (calibration uncertainty not included) |
E-field: ±0 dB @ 27.12 MHz ±1.0 dB (10 MHz to 42 MHz)
H-field: ±0 dB @ 27.12 MHz ±0.6 dB (10 MHz to 42 MHz)
|
| Calibration Uncertainty | ±0.5 dB |
| Lineraity (Referred to 10 mW/cm² |
±1 dB (0.5 to 2 mW/cm²)
±0.5 dB (2 to 100 mW/cm²)
|
| Isotropic Response | ±1 dB |
| Temperature Response | +0.8 dB (10°C to 40°C) |
| Calibration | |
| Calibration Frequencies | 13.56/ 27.12/ 40.68 MHz |
| Recommended Calibration Interval | 24 months |
| General Specifications | |
| Battery | NiMH rechargeable batteries, 2 x AA size (Mignon), 2500 mAh, included |
| Operation Time | Approx 22 hours |
| Charging Time | 2 hours |
| Battery Level Display | 100%, 80%, 60%, 40%, 20%, 10%, low level (< 5%) |
| Temperature Range Operating Non-Operating (transport) |
-10 °C to +50 °C -30 °C to +70°C
|
| Humidity |
5 to 95 % RH @ ≤28 °C, non condensing
≤26 g/m³ absolute humidity (IEC 60721-3-2 class 7K2)
|
| Size (h x w x d) Meter Probe Cable |
1.5” x 2.0” x 8.1” (38 x 52 x 205 mm) 16 inches long (410 mm)
44 inches long (1.1 m)
|
| Weight Meter Probe |
0.66 lbs (300 g) 0.68 lbs (310 g)
|
| Accessories (included) |
Hard case, power supply, rechargeable batteries, shoulder strap, operating manual,
certificate of calibration
|
NIM-513 Industrial Radiation Field Meter Applications
The NIM-513 industrial radiation field meter is suitable for major safety standards worldwide require that both the electric and the magnetic field components (E and H fields) be measured.
- RF Heat Sealers and Vinyl Welders
- Semiconductor Process Equipment and Glass Deposition
- RF Induction Heating
- Dielectric Dryers and Heaters
- Plasma Generation Systems
