Narda AMS-8063 Selective Area Monitor
A frequency selective monitoring system with electric and magnetic sensors, to guarantee an optimal sensitivity and anisotropy.
Narda EMF Monitors are reliable, autonomous, weatherproof and accurate. Their robust, uncluttered construction is perfect for the continuous monitoring of electromagnetic fields and for long-term outdoor installations. The AMS-8063 combines a
tried and tested measurement method with spectrum analysis.
The frequency selective monitoring system AMS-8063 is a reliable, accurate solution for monitoring remotely Electromagnetic Fields in the frequency range from 9 kHz to 30 MHz, by measuring separately the Electric and Magnetic components as total value of the field strength and as frequency selective spectrum analysis. Its unique features make the AMS-8063 particularly suitable for monitoring the exposure levels in proximity of LW, MW and SW broadcasting antenna installations. The information obtained contribute to evaluating the antenna efficiency too. The electric and magnetic field strengths are measured at regular intervals and sent to a central data logging and control unit based on a PC, which provides the mass memory for all AMS-8063 units installed in the local network
The EMF monitors are complemented by a wide range of software solutions for their configuration and the collection and clear Internet presentation of measured values. One of Narda’s preferred solutions for this is EMF Observatory.
For more information on the AMS-8063 Selective Area Monitor contact your local Air-Met office.
AMS-8063 Selective Area Monitor Features
- ITU-T K.83 compliant
- Monitors individually programmable frequency bands
- Frequency range 9 kHz to 30 MHz
- Internal modem for wireless communication
- USB / Ethernet data transfer
- SD memory card
- Temperature / air humidity sensor
- GPS sensor
- Easy software for spectrum analysis
- PC software with alarm functions
- Built in spectrum analyzer for monitoring up to 100 user defined frequencies
- Simultaneous monitoring of electric and magnetic fields
- Suitable LW, MW and SW broadcasting antenna installations
- Low weight and compact size for easy location changes
- Robust design for use both indoors and outdoors
- Dimensions: 1480x1100x715 mm
- Fully autonomous operation
Narda AMS-8063 Selective Area Monitor Specifications
| Frequency range | 9 kHz to 30 MHz |
| Measurement range |
0.1 to 1000 V/m (from 9 kHz to 30 MHz) |
| Resolution | 0.01 V/m, 0.1 mA/m |
| Sensitivity | 0.01 V/m (depending on the RBW filter) |
| Measurement units | V/m, A/m |
| Measured field | Electric and magnetic |
| Storing interval |
Table mode: selectable from 1 to 1440 minutes |
| Functions | Spectrum Mode; Frequency Table, AVG, RMS |
| Communication | Wireless LAN 802.11b 2.4 GHz (AMS-8063/00), RS 232 (AMS-8063/01), Optical Fiber (AMS-8063/02) |
| Battery pack | Backup sealed Pb rechargeable battery, 12 V 32 Ah |
| Solar panels | 2 x 40W 17.5V (AMS-8063/00 and AMS-8063/01 only) |
| Consumption | 4W |
| External power supply | 100-220 V, 50/60 Hz to 24 VDC, 1.25A |
| Autonomy with batteries only | > 48 Hours |
| Recharge time | > 12 Hours with external power supply |
| Operating temperature | -20 °C to +55 °C |
| Protection grade | IP54 |
| Overall dimensions (L x H x D) | 1480 x 1100 x 715 mm (AMS-8063/00 and AMS-8063/01); 1480 x 660 x 600 mm (AMB-8063/02) |
| Weight approx. | 35 kg (AMS-8063/00 and AMS-8063/01) - 27 kg (AMS-8063/02) |
| Country of origin | Italy |
AMS-8063 Selective Area Monitor Usage and Application
- Effective and useful monitoring of schools, hospitals, residential and public areas and workplaces
- Monitoring of identified critical sites in previous measurement campaigns
- Reduction of risk that new installations may have on the environment.
