LO-PRO Low Profile Air Strippers

Overview

Geotech LO-PRO™ models II and III are highly efficient water treatment systems that can remove up to 99.99% of many volatile organic compounds (VOC’s) from water.

Systems are self-contained for use in limited space applications.

Contaminated water enters the Geotech LO-PRO™ at the top of the unit and cascades onto the first of a series of stainless steel bubble plates. A baffle in the centre of each plate redirects the water 180° in each stage as it flows downward, alternating between clockwise and counter clockwise directions. This action optimises the residence time of the water in the Geotech LO-PRO™, allowing for efficient contaminant removal.

For more information on the LO-PRO Low Profile Air Strippers, contact your local Air-Met office.

Features

Patented multi-stage counter flow aeration provides up to 99.99% removal efficiency.
Features vacuum-induced draft design that is more efficient than forced draft and eliminates fluid leakage between trays.
Low profile modular design requires less floor and head space.
Light weight modular polyethylene trays allow the addition or subtraction of trays to meet engineered treatment requirements.
Stainless steel bubble plate design resists fouling.
Highly effective on BTEX, MTBE, and Radon.
Very easy to install and maintain.
Remote monitoring and troubleshooting capability with the optional Geotech ECM.
Available in 2 models:
- LO-PRO Model II
- LO-PRO Model III

Specifications

	LO-PRO Model II	LO-PRO Model III
Applications	For use in non-classified and Class 1, Div. 2 locations	High flow-rate for use in non-classified and Class 1, Div. 2 locations
Dimensions	5 tray unit: 66"L x 27"W x 75"H Each additional tray adds 10" to height	3 tray unit: 91"L x 60"W x 70"H Each additional tray adds 13" to height
Maximum No. of Trays	8	5
Material	Linear Low Density Polyethylene Housing Stainless steel bubble plates	Light Weight Polyethylene Housing Stainless steel bubble plates
Water Flow	1-20 gpm (4-76 l / min)	1-60 gpm (4-227 l / min)
Air Flow	Up to 250 CFM (7.1 CMM)	Up to 1100 CFM (31 CMM)
Blower HP	1-5 HP regenerative blower (TEFC: for use in Class 1, Div. 2 locations)	10-15 HP centrifugal blower (TEFC: for use in Class 1, Div. 2 locations)
Blower Voltage	208-230/460V, 50 Hz or 60 Hz, 3 phase Single phase available	208-230/460V, 50 Hz or 60 Hz, 3 phase
Options	High pressure switch assembly, low pressure switch assembly, Geotech ECM controls and telemetry, motor starter package, sump water level sensor, additional trays, CFM gauge and valve assembly, transfer pumps. Explosion-proof blower.	High pressure switch assembly, low pressure switch assembly, Geotech ECM controls and telemetry, motor starter package, sump water level sensor, additional trays, CFM gauge and valve assembly, transfer pumps. Explosion-proof blower.