Haloguard IR Refrigerant Leak Detection Monitoring System

Highly Sensitive Photoacoustic Infrared Monitoring System for Refrigerant Gases.

SKU
HALOGUARDIR-1
Only 0 left
Photoacoustic Infrared, Highly Selective, Most Sensitive (1ppm), 24-hour Refrigerant Leak Detection and Notification Refrigerant Leak Detection and Monitoring Systems
 
The HALOGUARD ® IR combines advanced microprocessor based digital signal processing and a highly selective and sensitive photo acoustic infrared cell to provide the newest, most sensitive system for continuous monitoring of any refrigerant gas. 
 
The HALOGUARD ® IR monitors single or multiple, local and remote locations and provides notification when gas concentration reaches preset alarm levels. Add individual, simultaneous monitoring of up to 3 different gases and up to 24 sample points by adding optional channel scanners and remote IR modules. 
 
Alarm relays and analogue outputs are designed to activate remote devices or to interface with an energy management (EMS) or building automation (BAS) system.
For more information on the Haloguard IR Leak Detection System, contact your local Air-Met office. 
 
 
  • Simple installation
  • Easy field calibration
  • Up to 500 ft. sample draw
  • Three user alarms adjustable between 10 ppm & 100% of scale
  • LCD shows PPM Concentration, Alarm, Test, Reset and Fault Diagnostics
  • Three flashing alarm LED ’s
  • Fault, Ready & Power ON/OFF LED ’s
  • Analogue output for BAS/EMS interface or data logging
  • Four alarm relays for ventilation, damper or remote notification
  • Alarm Test &Reset/Silence push buttons
  • High-intensity audible alarm
  • Rugged enclosure
Technology
Photoacoustic Infrared
Electrical Supply 115-230v, 50-60 Hz, 65W
Fuse 3A/240V, fast acting
Output Signal
Std: 4x5A, dry contact relay SPDT 
Opt: 7x10A, dry contact relay SPDT 
Opt: 0-5VDC, 4-20mA analogue
Sensitivity 1 ppm
Resolution 1 ppm
Measuring Range 0-1000 ppm all refrigerants
Response Time <1 minute per channel
Clearing Time <3 minutes per channel
Maximum Sample Point Tubing Length
150' with standard performance
500' optional where slower response is acceptable
Operating Conditions 32°F to +120°F non-condensing
Enclosure:
Std: NEMA 250, 20 lbs.
Opt: NEMA 4/12, 25 lbs.
Sample Rate 1.0 lpm

Listed to UL 3111-1 and CAN/CSA-C22.2 No. 1010.1-92

  • Refrigeration Equipment
  • Machinery Rooms
  • Cold Storage Areas
  • Process Cooling